DIY Ultrasonic album cleaner

0 Members and 1 Guest are viewing this topic. Read 18732 times.

sfox7076

  • Full Member
  • Posts: 1278
Re: DIY Ultrasonic album cleaner
« Reply #180 on: 26 Jul 2017, 06:04 pm »

JDUBS

Re: DIY Ultrasonic album cleaner
« Reply #181 on: 30 Jul 2017, 07:02 pm »
Are any of you guys cleaning your fluid so you can reuse it, with something like this?:

http://www.diyaudio.com/forums/analogue-source/218276-my-version-ultrasonic-record-cleaner-13.html#post3215289

-Jim

S Clark

  • Full Member
  • Posts: 5050
  • Measurements don't make your toes tap
Re: DIY Ultrasonic album cleaner
« Reply #182 on: 30 Jul 2017, 07:26 pm »
I filter my fluid a couple of times before using it for car windshield wash.  Unlike the process you cited, I'm very low tech, using coffee filters and gravity. 

toddc2

  • Jr. Member
  • Posts: 241
Re: DIY Ultrasonic album cleaner
« Reply #183 on: 11 Sep 2017, 07:00 pm »
Are any of you guys cleaning your fluid so you can reuse it, with something like this?:

http://www.diyaudio.com/forums/analogue-source/218276-my-version-ultrasonic-record-cleaner-13.html#post3215289

-Jim

Yes and the filter system works great! Here's my setup:

I installed a pump and filter system similar to Rushton's. It was a little harder to source the exact parts in Canada so I ended up with:

Sicce Syncra 0.5 aquarium pump found at a local aquarium supply shop
10 feet of 3/8" Inside Diameter clear hose (really only needed 4 feet or so)
Pentek 158110 3/8-Inch 5-Inch Slim Line Clear Filter Housing from Amazon.ca
Pentek PD-1-934 Polypropylene Filter Cartridge, 9-7/8-Inch x 2-1/2-Inch, 1 Micron from Amazon.ca (big mistake see below)
3ea. 1/2" NPT x 3/8" barb connectors from OntarioBeerKegs.com
3ea. 3/8" NPT x 3/8" barb connectors from Home Depot
1ea. 3/8" female cap for sealing the drain end out of the filter when not in use

I learned a few things:

1. I taped the joints with teflon tape but still got some leakage. I ended up replacing the white teflon tape with pink teflon tape made for water joints and the leaks stopped.

2. The gasket on the filter housing MUST be greased prior to use, the damn thing leaked like a sieve without the grease. I had some white lithium grease normally used on my turntable bearing that did the trick.

3. The aquarium guy told me I could cut a 10" filter in half for my 5" filter housing, but that really didn't work well. I tried to cut it with a hacksaw and made a mess of it. I am using one of the halves temporarily but I ended up ordering the 5" filters from Amazon.ca (Hydronix SDC-25-0501 NSF Sediment Filter 2.5-Inch OD X 4 7/8-Inch Length, 1 Micron, Pack of 2). They have a 3-4 week lead time.

Once the 5" filters arrive I plan on filtering the water after every batch of records.

simoon

  • Full Member
  • Posts: 775
Re: DIY Ultrasonic album cleaner
« Reply #184 on: 24 Oct 2017, 12:38 am »
I kind of like this guy's method of drying records after they come out of he US bath.


https://youtu.be/wFiZDiM6CHc?t=697


Simple, cheap and seems effective.

S Clark

  • Full Member
  • Posts: 5050
  • Measurements don't make your toes tap
Re: DIY Ultrasonic album cleaner
« Reply #185 on: 24 Oct 2017, 02:38 am »
I like simple.  His setup using a drill and centripetal force should work well for those who don't have a vacuum setup.  Regardless, the ultrasonic cleaning method is simply better than your standard VPI/Nitti Gritty type cleaners.

simoon

  • Full Member
  • Posts: 775
Re: DIY Ultrasonic album cleaner
« Reply #186 on: 30 Oct 2017, 08:56 pm »
The 6L ultrasonic cleaner just had a major price drop from one ebay seller!

Makes it even cheaper to get into ultrasonic cleaning, whether you DIY or buy one of the kits from https://thevinylstack.com/ultrasonic-cleaning/ultra-sonic-spin-record-cleaning-kit/

$43.00!

https://www.ebay.com/itm/6L-Ultrasonic-Cleaner-Stainless-Steel-Industry-Heated-Heater-w-Timer/263266583267?hash=item3d4be942e3%3Ag%3AMUwAAOSwrjBZ5WtO&afsrc=1&rmvSB=true

undertowogt1

Re: DIY Ultrasonic album cleaner
« Reply #187 on: 30 Oct 2017, 09:06 pm »
The 6L ultrasonic cleaner just had a major price drop from one ebay seller!

Makes it even cheaper to get into ultrasonic cleaning, whether you DIY or buy one of the kits from https://thevinylstack.com/ultrasonic-cleaning/ultra-sonic-spin-record-cleaning-kit/

$43.00!

https://www.ebay.com/itm/6L-Ultrasonic-Cleaner-Stainless-Steel-Industry-Heated-Heater-w-Timer/263266583267?hash=item3d4be942e3%3Ag%3AMUwAAOSwrjBZ5WtO&afsrc=1&rmvSB=true

thats a good deal, mine was about $165 Canadian

dolsey01

  • Jr. Member
  • Posts: 67
Re: DIY Ultrasonic album cleaner
« Reply #188 on: 30 Oct 2017, 09:17 pm »
The 6L ultrasonic cleaner just had a major price drop from one ebay seller!

Makes it even cheaper to get into ultrasonic cleaning, whether you DIY or buy one of the kits from https://thevinylstack.com/ultrasonic-cleaning/ultra-sonic-spin-record-cleaning-kit/

$43.00!

https://www.ebay.com/itm/6L-Ultrasonic-Cleaner-Stainless-Steel-Industry-Heated-Heater-w-Timer/263266583267?hash=item3d4be942e3%3Ag%3AMUwAAOSwrjBZ5WtO&afsrc=1&rmvSB=true

Must be a price mistake, the shipping alone from China must be close to that.

audio.bill

  • Jr. Member
  • Posts: 263
Re: DIY Ultrasonic album cleaner
« Reply #189 on: 30 Oct 2017, 10:09 pm »
That price does seem quite suspect since all comparable units seem to be $100 or more, and the seller has limited feedback none of which for any similar product.

S Clark

  • Full Member
  • Posts: 5050
  • Measurements don't make your toes tap
Re: DIY Ultrasonic album cleaner
« Reply #190 on: 30 Oct 2017, 10:39 pm »
Yep.  I checked out the guys sales history also.  Nothing like it sold in his limited past.  Helluva deal, but some risk.  Funny how they always go together.

thunderbrick

  • Volunteer
  • Posts: 5144
  • I'm just not right!
Re: DIY Ultrasonic album cleaner
« Reply #191 on: 30 Oct 2017, 10:50 pm »
And all of his "successful" sales were to the same guy at .99 each.    No way!!!

audio.bill

  • Jr. Member
  • Posts: 263
Re: DIY Ultrasonic album cleaner
« Reply #192 on: 30 Oct 2017, 11:53 pm »
You would be covered by eBay's money back guarantee if you don't receive the item as described, but not sure who would be responsible for return shipping if required which could be significant going back to China.