AudioCircle
Industry Circles => GR Research => Topic started by: Peter J on 6 Nov 2017, 10:10 pm
-
I've been talking to Danny about an index of sorts linking individual build threads for all things GR Research. A sticky master thread kind of thing. I suspect many would find them helpful in their own builds, but many are buried in the archives. Folks with existing threads are encouraged to LINK them here. It's not intended to be a massive compilation but rather a jumping off spot. I'll start if off with examples done over the years.
-
X-LS
http://www.audiocircle.com/index.php?topic=150120.0
X-Otica
http://www.audiocircle.com/index.php?topic=139529.0
X-SLS and AV1-RS
http://www.audiocircle.com/index.php?topic=100369.0
Sandbox sub
http://www.audiocircle.com/index.php?topic=84765.0
-
Here's a couple more
OB7 Build
http://www.audiocircle.com/index.php?topic=114219.0
N3 Buiold (fonrt vented)
http://www.audiocircle.com/index.php?topic=108845.0
Dual 12" OB H-Frames (non flat ack versions)
http://www.audiocircle.com/index.php?topic=127533.0
Triple 12" OB H-Frame (non flat pack version)
http://www.audiocircle.com/index.php?topic=134523.0
Mini build X - LS Encores
http://www.audiocircle.com/index.php?topic=144419.msg1543794#msg1543794
Will dig up some more later
jay
-
LGK 1.0 Bamboo
http://www.audiocircle.com/index.php?topic=133131.0 (http://www.audiocircle.com/index.php?topic=133131.0)
X-LS mini-monitor
http://www.audiocircle.com/index.php?topic=88377.0 (http://www.audiocircle.com/index.php?topic=88377.0)
-
NX Otica MTM and Dual Servo Subs in H Frame
http://www.audiocircle.com/index.php?topic=146187.0
Multiple Wedgie Builds (linked to the first page with a build starting)
http://www.audiocircle.com/index.php?topic=126112.380
-
Here's some of mine:
This is my first build X-LS Encore & X-CS Encore Build
http://www.audiocircle.com/index.php?topic=117653.msg1234925#msg1234925
After those a few more: N1X
http://www.audiocircle.com/index.php?topic=120188.msg1263895#msg1263895
N3TL
http://www.audiocircle.com/index.php?topic=120896.msg1272102#msg1272102
X-CS Encore & X-MTM Encore
http://www.audiocircle.com/index.php?topic=128392.0
3 x 8 Servo H Frame build
http://www.audiocircle.com/index.php?topic=134065.0
A/V-1RS
http://www.audiocircle.com/index.php?topic=135338.msg1438157#msg1438157
LGK Wedge and Bass Unit Build
http://www.audiocircle.com/index.php?topic=135561.msg1440414#msg1440414
3 x 8 Servo H-Frame build with a twist
http://www.audiocircle.com/index.php?topic=147658.msg1579534#msg1579534
NX-Otica MTM and dual 12" H-Frame build
http://www.audiocircle.com/index.php?topic=149272.msg1596343#msg1596343
Mike
-
My LS-9's which have held up well over the years, a killer Line Array, but no easy build task. Too bad they are discontinued! I power them with Emotiva gear - XMC-1 Processor and (2) XPR-1 amps.
http://www.audiocircle.com/index.php?topic=80580.msg771669#msg771669
-
LGK 1.0 + veneer:
http://www.audiocircle.com/index.php?topic=125221.0
BK
-
And a link to my OB-5 build. My avatar is the finished speaker.
http://www.audiocircle.com/index.php?topic=59326.0
Thanks Peter
(http://www.audiocircle.com/image.php?id=22709)
-
Here is my build: NX-Studio Monitor
(https://www.audiocircle.com/image.php?id=205979)
https://www.audiocircle.com/index.php?topic=168181.0 (https://www.audiocircle.com/index.php?topic=168181.0)
This build is on going as of this posting but is almost finished.
Edit: These are now complete.
-
@ Sonicjoy, WOW, beautiful!
-
Thanks Schift! And welcome to the forum. :D These sound even better than they look.
-
X-STATIKS BUILD
Since Danny just did a video on the X-Statiks, I thought I would add a link to my build I did last year. https://www.audiocircle.com/index.php?topic=164148.0
Sandbox OB H Frame Build
https://www.audiocircle.com/index.php?topic=170649.0
-
Very nice! Thanks for posting. Just read through your build thread. Looks like it was a fun project.
-
I broke out my AV123 X-Statiks just for a visual comparison to my Super 7’s.
(https://www.audiocircle.com/image.php?id=207795&size=large)
(https://www.audiocircle.com/image.php?id=207794&size=large)
(https://www.audiocircle.com/image.php?id=207796&size=large)
-
To Sonicjoy on his build of the NX studio. Firstly, very nice job. I’m using it to guide my own imperfect build. Can I ask whether your suggestion to cut the no Rez sheets into 2, 5x27” and 2, 8x27” should really have been 2, 5x27” and 2, 7x27” since the sheets are only 24x27” total?
Thanks
-
Hi All, Wanted to drop in and learn about building some GR Speakers. I am a beginner audiophile so know just enough to be dangerous . . . For the last few years i have been upgrading equipment and trying different ideas that may improve my listening experience. My last upgrade was ordering GIK room treatment . . . which arrives next month. For my next project I thought it may be fun to try to build some speakers and GR products come up regularly on YouTube from reviewers like New Record Day, these treads and others. Sonicjoys NX studios - look great. I listen in a relatively small room (10' x 13') - with the speakers on 13' wall. The room is also our home office so not ideal placement. Any thoughts?
-
I've been talking to Danny about an index of sorts linking individual build threads for all things GR Research. A sticky master thread kind of thing. I suspect many would find them helpful in their own builds, but many are buried in the archives. Folks with existing threads are encouraged to LINK them here. It's not intended to be a massive compilation but rather a jumping off spot. I'll start if off with examples done over the years.
Hi y'all. My original vision on starting this thread was to build an index to make it easier to find relevant build threads for everybody's reference. It's not mine to control but I would humbly request that it remain true to that vision.
Discussion would ideally be within the referenced threads themselves or begin a new one. Any new posts in old threads will pop to the top so they'll be visible. If you want to post photos of your work, there's another sticky just for that. If we continue down the path of turning this into yet another meandering hodge-podge, the point of having an index is lost. If I could prune it, I would.
Help me out here, so that this one sticky can remain tightly focused on it's original point...to provide an easy reference for all, now and in the future. I'm climbing off my soapbox now.
-
Here's my XLS build thread:
https://www.audiocircle.com/index.php?topic=170887.0
(https://www.audiocircle.com/image.php?id=211166&size=large)
And my ongoing NX-Studio build thread:
https://www.audiocircle.com/index.php?topic=172031.0
(https://www.audiocircle.com/image.php?id=213673&size=large)
-
Triple 12" OB H-Frame Servo Subs
https://www.audiocircle.com/index.php?topic=168194.0
(https://www.audiocircle.com/image.php?id=206360)
NX-Tremes
https://www.audiocircle.com/index.php?topic=169590.0
(https://www.audiocircle.com/image.php?id=208433)
Speaker Cables
https://www.audiocircle.com/index.php?topic=172291.0
(https://www.audiocircle.com/image.php?id=214999)
NX-Oticas
This is my brother's build thread.
https://www.audiocircle.com/index.php?topic=169168.0
(https://www.audiocircle.com/image.php?id=208981)
-
.
-
.
-
Russell's Builds
X-SLS Encores
https://www.audiocircle.com/index.php?topic=171848.0
(https://www.audiocircle.com/image.php?id=216840)
Sealed Servo Sub
https://www.audiocircle.com/index.php?topic=170554.0
(https://www.audiocircle.com/image.php?id=216841)
Open Baffle H Frame with Built In Amp
https://www.audiocircle.com/index.php?topic=173562.0
(https://www.audiocircle.com/image.php?id=217973)
NX-Otica
https://www.audiocircle.com/index.php?topic=181020.0
(https://www.audiocircle.com/image.php?id=243302)
-
Beauties :thumb:
-
Here is my X-MTM build thread:
https://www.audiocircle.com/index.php?topic=170542.msg1805831#msg1805831
(https://www.audiocircle.com/image.php?id=220233)
It is slightly different from Danny’s design, with the ports in the front instead of the back. But it works well in the room that they are in where they have to be up against the wall behind them. My thread discusses this in more detail.
My X-LS and X-CS build thread:
https://www.audiocircle.com/index.php?topic=174915.0
(https://www.audiocircle.com/image.php?id=227694)
(https://www.audiocircle.com/image.php?id=237981)
And my X-SLS build threat:
https://www.audiocircle.com/index.php?topic=185519.0
(https://www.audiocircle.com/image.php?id=257426)
The X-SLS speakers next to one of the X-MTM speakers.
-
I broke out my AV123 X-Statiks just for a visual comparison to my Super 7’s.
(https://www.audiocircle.com/image.php?id=207795&size=large)
(https://www.audiocircle.com/image.php?id=207794&size=large)
(https://www.audiocircle.com/image.php?id=207796&size=large)
X-STATIKS BUILD
Since Danny just did a video on the X-Statiks, I thought I would add a link to my build I did last year. https://www.audiocircle.com/index.php?topic=164148.0
Sandbox OB H Frame Build
https://www.audiocircle.com/index.php?topic=170649.0
How are you liking these? My plan is to get them one day, but I haven't heard any first hand accounts. I'm in love with the x static
-
Love them! Resolution is up there with the best I’ve heard. Like someone else said, I’m done shopping for speakers.
I love my Statiks too!
-
X-CS & X-MTM:
https://www.audiocircle.com/index.php?topic=174892.0
(https://www.audiocircle.com/image.php?id=223422)
-
Quick Question... How many sheets of No-Res are required for the Servo Sub Kit 4?
(https://www.audiocircle.com/image.php?id=224495)
-
Takes 2 Sheets of No-Res according to Danny for this project. Primed and sanded. Going for a smooth look. If I hate it then Dura-Tex covers all blemishes.
(https://www.audiocircle.com/image.php?id=224596)
-
First coats of Black Satin...
(https://www.audiocircle.com/image.php?id=224597)
-
X-Statik build. Walnut veneer. No-rez.
(https://www.audiocircle.com/image.php?id=225807)
-
X-Statik build by Hollis Prince.
https://www.audiocircle.com/index.php?topic=176956.0
I've built a few speakers this past year, but this is my first GR-Research build. They were built from scratch, not a flat pack. I'm extremely happy with how they turned out.After the X-Statiks I'm gonna build a X-Voce and then a pair of X-LS Encores for surrounds.
Thanks for checking out my build!
-
Does anyone offer build services? Putting together a kit for someone else?
-
Does anyone offer build services? Putting together a kit for someone else?
See this thread: https://www.audiocircle.com/index.php?topic=164355.0
-
A/V-1RS (old style - now called X-On Wall): https://www.audiocircle.com/index.php?topic=178029
(https://www.audiocircle.com/image.php?id=229289)
(https://www.audiocircle.com/image.php?id=229602)
(https://www.audiocircle.com/image.php?id=230129)
Servo Sub 4 (now called Double Trouble): https://www.audiocircle.com/index.php?topic=176852
(https://www.audiocircle.com/image.php?id=228207)
(https://www.audiocircle.com/image.php?id=228257)
(https://www.audiocircle.com/image.php?id=229737)
-
NX-Studio :scratch:
https://www.audiocircle.com/index.php?topic=172031.0
(https://www.audiocircle.com/image.php?id=229657&size=large)
(https://www.audiocircle.com/image.php?id=230142&size=xlarge)
-
NX-Studio :scratch:
https://www.audiocircle.com/index.php?topic=172031.0
(https://www.audiocircle.com/image.php?id=229657&size=large)
(https://www.audiocircle.com/image.php?id=230142&size=xlarge)
Why are you blacking out parts of the values of the parts illustrated ?
-
Why are you blacking out parts of the values of the parts illustrated ?
To not give away the values, since they are Danny's design. If you want to know the values, you habe to buy the kit.
It's a common practice on this circle.
-
X-LS Encore from France
https://www.audiocircle.com/index.php?topic=179917 (https://www.audiocircle.com/index.php?topic=179917)
(https://www.audiocircle.com/image.php?id=234782)
-
Mini build with my Granddaughter.
JCarney
https://www.audiocircle.com/index.php?topic=177906.0
(https://www.audiocircle.com/image.php?id=234913)
-
The Lyngdorf MP60 2.1 pulled everything together. I built the cabinet to nestle the 65" screen between my 3.6 Magnepan planers which need the power of the Musical Fidelity M8 500. I also built the GR Research W/Frame Rythmik powered Open Baffle subs to go with the white look.
The W/Frame subs have worked fine for music but movie bass would often make them bottom out and blow off the covers. The RoomPerfect software has eliminated the problem. Now the subs can handle anything, no bottoming.
Using the RoomPerfect guide, I went all the way to 100% correction with 13 mic positions. There are Magnepan 1.7's on the sides and MC1's in the rear.
The audio realism is just what I was hoping for. Even though the MP60 is an expensive upgrade, I wanted the Open Baffle GR Research people to hear what the MP60 can do for their subs. PS I know how to get a much better price on the MP60 2.1.
(https://www.audiocircle.com/image.php?id=236437)
(https://www.audiocircle.com/image.php?id=236438)
(https://www.audiocircle.com/image.php?id=236439)
(https://www.audiocircle.com/image.php?id=236440)
-
Mini build with my Granddaughter.
JCarney
https://www.audiocircle.com/index.php?topic=177906.0
(https://www.audiocircle.com/image.php?id=234913)
BVery nice indeed!!I've been talking to Danny about an index of sorts linking individual build threads for all things GR Research. A sticky master thread kind of thing. I suspect many would find them helpful in their own builds, but many are buried in the archives. Folks with existing threads are encouraged to LINK them here. It's not intended to be a massive compilation but rather a jumping off spot. I'll start if off with examples done over the years.
-
My LS-9's which have held up well over the years, a killer Line Array, but no easy build task. Too bad they are discontinued! I power them with Emotiva gear - XMC-1 Processor and (2) XPR-1 amps.
http://www.audiocircle.com/index.php?topic=80580.msg771669#msg771669
Are there people out there that can actually complete Danny's DIY kits for guys like me that are not handy? I love the idea of quality made, instead of the meet the price point thing. I am new here, so bare with me.
-
Here's some of mine:
This is my first build X-LS Encore & X-CS Encore Build
http://www.audiocircle.com/index.php?topic=117653.msg1234925#msg1234925
After those a few more: N1X
http://www.audiocircle.com/index.php?topic=120188.msg1263895#msg1263895
N3TL
http://www.audiocircle.com/index.php?topic=120896.msg1272102#msg1272102
X-CS Encore & X-MTM Encore
http://www.audiocircle.com/index.php?topic=128392.0
3 x 8 Servo H Frame build
http://www.audiocircle.com/index.php?topic=134065.0
A/V-1RS
http://www.audiocircle.com/index.php?topic=135338.msg1438157#msg1438157
LGK Wedge and Bass Unit Build
http://www.audiocircle.com/index.php?topic=135561.msg1440414#msg1440414
3 x 8 Servo H-Frame build with a twist
http://www.audiocircle.com/index.php?topic=147658.msg1579534#msg1579534
NX-Otica MTM and dual 12" H-Frame build
http://www.audiocircle.com/index.php?topic=149272.msg1596343#msg1596343
Mike
Mike, can you be contracted to build one of Danny's Kits? I am new, so please bare with me
-
Hello Danny/Hobbs,
I am a newbie as a registered member & need your help in establishing the requirements in being able to access, search & joing forums...I can't see or i am not looking at the right place for the Trading Post?! Love what you guys do & have fired up the flame for my love for good to better HiFi sounds at like Danny always says "that are a bargain base prices, i say that it benefits me coz what you offer "won't break the bank" but definitely make the mediocre better! Thank you.
-
Welcome to AudioCircle, Guchee!
You will automatically gain access to search, trading post and PMs after you have made 3 moderated posts. They can be in any circles.
For your own safety, please remove your phone number from your profile's "personal text."
-
Hello Danny/Hobbs,
I am a newbie as a registered member & need your help in establishing the requirements in being able to access, search & joing forums...I can't see or i am not looking at the right place for the Trading Post?! Love what you guys do & have fired up the flame for my love for good to better HiFi sounds at like Danny always says "that are a bargain base prices, i say that it benefits me coz what you offer "won't break the bank" but definitely make the mediocre better! Thank you.
Heya and welcome to AC!
You can find ghe trading post here:
https://www.audiocircle.com/index.php?board=109.0
-
I’ve been pining for a decent Hifi system for decades. Finally in a place where I can make it happen. A do it yourselfer with a medium budget intending to leverage that into a pretty decent system. I think that describes the middle class skill set. Just received my NX Studio flat pack and awaiting the kit as well as the speaker cable.
-
Thanks for the compliment Bavillusme, much appreciated. She had fun, learned she likes soldering stuff as well as building stuff. The little amp driving the speakers are hooked up to the tv and they use some amazon thing for music usually. They are used daily from what I can tell.
JCarney
-
Hey Bavillusme, you asked mlundy if he can finish cabinets. Well, he can, and here is where you can read about it. https://www.audiocircle.com/index.php?topic=164355.0. Best of luck in your search.
JCarney
-
Hi y'all. My original vision on starting this thread was to build an index to make it easier to find relevant build threads for everybody's reference. It's not mine to control but I would humbly request that it remain true to that vision.
Discussion would ideally be within the referenced threads themselves or begin a new one. Any new posts in old threads will pop to the top so they'll be visible. If you want to post photos of your work, there's another sticky just for that. If we continue down the path of turning this into yet another meandering hodge-podge, the point of having an index is lost. If I could prune it, I would.
Help me out here, so that this one sticky can remain tightly focused on it's original point...to provide an easy reference for all, now and in the future. I'm climbing off my soapbox now.
I liked Peter's original vision for this thread.
-
Here was my NX-Studio build.
https://www.audiocircle.com/index.php?topic=178967.0 (https://www.audiocircle.com/index.php?topic=178967.0)
Some decent tips on painting process and burning in crossovers. Hopefully it's helpful to some. :thumb:
-
Corndog71, best finish combo Ive seen on XStatics. That has to be solid wood for the front baffle. Im going that route if I can find a thick slab of wood like that.
-
Corndog71, best finish combo Ive seen on XStatics. That has to be solid wood for the front baffle. Im going that route if I can find a thick slab of wood like that.
Sorry to disappoint but my X-Statiks were built in a factory down in Colombia for AV123. That is a real wood veneer though.
-
Sorry to disappoint but my X-Statiks were built in a factory down in Colombia for AV123. That is a real wood veneer though.
That would be AV123 speakers in what they called “Moho Natural”. That is definitely my all time favorite veneers. Corndog71’s is a great example is that.
Robert
-
Hello, as admin said, let start. Few months ago, I've ordered Danys X-LS. So after changing US units in metric I've ordered MDFs and send them to friend on CNC. So Befor pruduction some visualisations!
(https://www.audiocircle.com/image.php?id=238738)
(https://www.audiocircle.com/image.php?id=238739)
-
Hello, as admin said, let start. Few months ago, I've ordered Danys X-LS. So after changing US units in metric I've ordered MDFs and send them to friend on CNC. So Befor pruduction some visualisations!
VasjaG, it appears you're wanting to make a build thread here. Please don't. The intention was of this thread was LINK to your thread that resides within the main body of the GR Research Circle. Thus it would provide an index for future builders. Unfortunately it has run amok of late and is destined to become a bigger mess and less of a reference if we continue down this path. The idea is a good one, but it takes the group to make it work.
Danny or Hobbs, can you prune this thread and remove the chaff?
-
NX-Otica with a desktop mini on the side...
https://www.audiocircle.com/index.php?topic=180052.msg1892492#msg1892492
-
My NX-Tremes so far.
They just need to be lined with no res and wired.
(https://www.audiocircle.com/image.php?id=240237)
(https://www.audiocircle.com/image.php?id=240238)
(https://www.audiocircle.com/image.php?id=240239)
(https://www.audiocircle.com/image.php?id=240240)
-
I LOVE THIS PHOTO🙂❤️
Mini build with my Granddaughter.
JCarney
https://www.audiocircle.com/index.php?topic=177906.0
(https://www.audiocircle.com/image.php?id=234913)
-
Thank You! She's a cutey.
JCarney
-
Greetings, I've just joined the thread. I am building a set of X-LS speakers. It is my first time doing a build of this kind. I have the cases and crossovers finished but have a question as to the best way to cut up the no-rez for the bookshelf size. Of course the bottom is not covered and I intend to use fiberglass fill for the lower third but don't see how I can eek the top, sides, and back from the four pieces of no-rez. If I am correct, which area is OK to not cover more than an another? With the opportunity for new people to search for topics on the site disabled I am left to this snail way of getting information.
-
Here's a thread with a couple plages of options for cutting the Norez into smaller pieces. :thumb:
https://www.audiocircle.com/index.php?topic=181537.0
-
Hi, just producing the second of the third post to satisfy the site needs so I can search for answers. It is clear that due to the holiday, the messages will not be reviewed until the moderator returns possibly after the second of next year. I was hoping to get some help so I could complete my build for the holiday. On that note, Happy holidays and best wishes for the coming year.
-
Hi, just producing the second of the third post to satisfy the site needs so I can search for answers. It is clear that due to the holiday, the messages will not be reviewed until the moderator returns possibly after the second of next year. I was hoping to get some help so I could complete my build for the holiday. On that note, Happy holidays and best wishes for the coming year.
I approve them as soon as I see them and know that they are legit. A couple more and your posts will no longer need approval.
-
Just a quick follow up on my previous post, I have figured out what I need to do and at present seem to be on track to finish up tomorrow.
Regards to all and happy new year.
-
Just joined Audio Circle and came here straight!
Looking to build a pair of GR Research NX Oticas and a couple of DIY tube amps. Exciting times we live in!
-
I wish I had the opportunity to listen to open baffle.
-
NX-Otica build
https://www.audiocircle.com/index.php?topic=184659.0
(https://i.imgur.com/fUqzkeb.jpg)
-
I wish I had the opportunity to listen to open baffle.
You might. Where are you located? Several of us have been willing to audition speakers for folks. I'm in the Houston, TX area.
-
Here's my NX-Otica build thread with lots of photos. I'm in the Chicagoland area if anyone is interested in taking a listen 8)
https://www.audiocircle.com/index.php?topic=184521.0 (https://www.audiocircle.com/index.php?topic=184521.0)
(https://www.audiocircle.com/image.php?id=249777)
-
New at this but I'm about to start my first build. (LGK 2.1)
-
New guy assistance. With some assistance I put together a crossover for the LGK 2.1.
What determines which internal speaker wires are connected to the binding post/tube connector to the specific area of the crossover?
I identified the negative end of the woofer assembly, the positive end of the woofer, the positive end of the tweeter assembly. I am having difficulty identifying the negative tweeter loop & where the internal speaker wire that connects to the negative tweeter & slices into the negative woofer, eventually headed to the tube connector.
-
New guy assistance. With some assistance I put together a crossover for the LGK 2.1.
What determines which internal speaker wires are connected to the binding post/tube connector to the specific area of the crossover?
I identified the negative end of the woofer assembly, the positive end of the woofer, the positive end of the tweeter assembly. I am having difficulty identifying the negative tweeter loop & where the internal speaker wire that connects to the negative tweeter & slices into the negative woofer, eventually headed to the tube connector.
You will need to run a white wire from the negative terminal of the LGK driver straight back to the white tube connector, it doesn't connect to anything else other than the return leg of the woofer circuit.
-
Thanks again!
I have to add the customer support around all of the various processes are off the charts good. I can't recommend GRR products enough!
-
Thanks again!
I have to add the customer support around all of the various processes are off the charts good. I can't recommend GRR products enough!
You should post a build thread for your LGK 2.1, I think you would be the first for that model.
-
You should post a build thread for your LGK 2.1, I think you would be the first for that model.
I will try. My job is sending me out of town (again) & I decided to change the colors of my cabinets. Pics in about (another) 2 weeks.
* Still on the road but I was able to finish the color scheme & the crossover. Whenever I get back home I can put it together.
-
Hello All,
Here is the lastest build from far-far Hungary/Europe!
I love every seconds of this build. Sound amazing!
here is the process and a result:
(https://www.audiocircle.com/image.php?id=255599)
(https://www.audiocircle.com/image.php?id=255600)
(https://www.audiocircle.com/image.php?id=255601)
(https://www.audiocircle.com/image.php?id=255602)
(https://www.audiocircle.com/image.php?id=255603)
-
It looks great!
-
Thanks!
I'm very satisfied with their sound!
My friends ask to built to them too, but unfortunatelly delivery costs to Europe and custums in Hungary kill the great price!
I hope in the future there will be an europian distributor.
BR,
A
It looks great!
-
.
-
Is that for 2 different systems?
-
Is that for 2 different systems?
No, it’s for my fronts and rears in my HT/Music room.
-
No, it’s for my fronts and rears in my HT/Music room.
NX-Studio's for rears, holy shit that's awesome! Are you just running 2 channels for the front and no center channel? That's how I run my HT (NX-Oticas and triple OB subs).
-
.
-
Nice! Yes the NX series might be the best HT speakers I’ve ever heard. They have so much grunt and dynamics that they sound downright MEAN with HT material.
-
.
-
Awesome.. the anticipation has been intense. My room is borderline too small for these but I think I’ve added enough treatment to make it work well. Can’t wait to get some measuring going in my space.
How big is your room?
-
(https://www.audiocircle.com/image.php?id=259294)
Subs are finished
-
(https://www.audiocircle.com/image.php?id=259295)
-
I thought I would post the final outcome of my 'over the top' LGK 2.0 build.
Parts:
- Sonicaps bypassed with Dueland's JDM copper bypass caps
- Mundorf foil inductor (higher value) and Jantzen foil inductor (smaller value)
- Mundorf resistors
- Jantzen (non-magnetic) Speaker posts (I know, but I lost my tube connectors)
Cabinet:
- 3/4 inch bevel on front panel verticals
Finish:
- Ebony veneer (adhered with heat lock glue)
- Osmo hard wax-oil finish (4 coats)
(https://www.audiocircle.com/image.php?id=260020)
(https://www.audiocircle.com/image.php?id=260021)
(https://www.audiocircle.com/image.php?id=260022)
(https://www.audiocircle.com/image.php?id=260023)
-
Here is my X MTM Encore
https://www.audiocircle.com/index.php?topic=177626.0