[ALRAINBOW]

I have aqua damped stereo setup.it contains the following.

The cross over is 4  channel stereo.
One stereo for the woofer towers
One stereo amp for mid towers
One stereo for the tweeter towers
One stereo amp for subs.
I know where the crossover points should be and cutoff is adjustable .
Sub set at 80 he
Woofers at 300
Mid tower at 300
Tweeters at 6000
Now here is where I am not sure what to do first. 
Do I run a test to see how the room is reacting or test the speakers for proper bal first.

And does anyone here have software and hardware to Recomend in audio analyzing.
Microphone / software/ hardware
I am willing TP spend a few bucks to do it right, but I do need a method to follow.
Also can someone Recomend a book or website in doing this properly please.

Thanks
Al D

[audioengr]

I have aqua damped stereo setup.it contains the following.

The cross over is 4  channel stereo.
One stereo for the woofer towers
One stereo amp for mid towers
One stereo for the tweeter towers
One stereo amp for subs.
I know where the crossover points should be and cutoff is adjustable .
Sub set at 80 he
Woofers at 300
Mid tower at 300
Tweeters at 6000
Now here is where I am not sure what to do first. 
Do I run a test to see how the room is reacting or test the speakers for proper bal first.

I would test the speakers in the room from the listening position.  Don't worry about room resonances yet.

First, you need to optimize speaker placement and apply sidewall reflection treatments.

And does anyone here have software and hardware to Recomend in audio analyzing.
Microphone / software/ hardware

See:
http://www.empiricalaudio.com/computer-audio/recommended-systems

Steve N.

[ALRAINBOW]

I follow the amarra , but i use pc not mac, so what are my options.

[audioengr]

I follow the amarra , but i use pc not mac, so what are my options.

The link was to show you audiotools.com

Audio analysis tools.

Steve N.