[santakrooz]

Hi, The Phase plug came loose on one of my 626R woofers. Looking for any advice on re-gluing in. ie technique and recommendation on type of glue to use.

Thanks in advance
Michael

[Brax]

I had one come loose and I used hot glue to reinstall it. I used hot glue so it would set fast since I had no real way of clamping it ( I never removed the speaker from the cabinet) . I also cleaned all the old adhesive off the plug before putting it back in. Just be careful to not use too much.

[santakrooz]

Thx. I used silicon adhesive and it worked fine. Cleaned off the old as you pointed out. Working great.

-sk